 |
|
|
TIP: Extracting Fiber Optic Filament from Cable. |
|
|
Imagine the control you'll have with the Strands of filament sealed in a flexible, protective jacket! Easily cut into different lengths. Also very easy to cut back the protective jacket to expose the individual fiber optic filaments! |
|
 |
Carefully cut open one end of the cable with a standard hobby knife. |
|
NOTE: Keep the cable intact at the other end (near the light source). If you only extract the amount necessary to use or re-position you will maintain control of the strands and achieve maximum illumination! |
|
 |
This will
expose the individual fiber optic strands. You can now cut away the
cable cover. Be careful NOT to cut the filaments you just exposed. |
|
|
When you add a light source to one end, the opposite end becomes illuminated. VERY SAFE! No Electricity or heat is transferred thru the Fiber Optic strands. |
